09-10-2024, 09:16 PM
If you’re getting the P1703 code on your Ford, you’re probably dealing with a brake switch malfunction. I ran into this issue with my Ford Escape, and it was causing some oddities with the cruise control and brake lights. The brake switch is a small but important component located near the brake pedal. When it fails, the system doesn’t get the signal that you’re pressing the brake, which messes up functions like cruise control and, in some cases, gear shifting.
The fix is usually pretty straightforward. First, you’ll need to check if the brake switch is functioning properly. This can be done by observing if your brake lights come on when you press the pedal. If they don’t, it’s likely that the switch is faulty and needs replacing. Replacing the brake switch is simple, and all you need is a new switch and a few basic tools. It’s located right behind the brake pedal, and swapping it out should take you about 10-15 minutes. After replacing it, clear the error code, and everything should be back to normal.
The fix is usually pretty straightforward. First, you’ll need to check if the brake switch is functioning properly. This can be done by observing if your brake lights come on when you press the pedal. If they don’t, it’s likely that the switch is faulty and needs replacing. Replacing the brake switch is simple, and all you need is a new switch and a few basic tools. It’s located right behind the brake pedal, and swapping it out should take you about 10-15 minutes. After replacing it, clear the error code, and everything should be back to normal.